Pool Heating Installation and Service

Green Works AC handles pool heating installation and service for homeowners in Hobe Sound, DL. That covers new heater installs, repairs on heaters that have stopped working, and service on existing equipment. It is for anyone whose pool stays too cold, whose heater will not fire up, or who wants more swimming days when the weather cools. Call or send a request and we will set up a visit to look at your pool, your equipment, and what you want from the water.

Maybe the pool felt like a cold lake after the last front moved through. Maybe the heater runs all day and the water barely changes, or it shuts off after a few minutes, or it never comes on at all. Most people put up with it for a few weeks before they call. A short diagnostic visit usually tells you whether you are looking at a repair, a service call, or a replacement, and what each path involves.

What we handle

Our pool heating work falls into two parts: getting a heater installed, and keeping one running. On the install side, that means sizing a heater to the pool, setting it up with the existing pool equipment, and confirming it starts and heats. On the service side, it means finding out why a heater is underperforming and fixing it, plus checking equipment before the cool season starts.

• New pool heater installation
• Replacing an old or failed pool heater
• Troubleshooting a heater that will not start, will not hold a temperature, or cycles on and off
• Checking the heater before the cooler months
• Walking you through the controls and how to set the temperature

Signs your heater needs attention

Pool heaters rarely fail without warning. These are the symptoms homeowners in this area mention most often:

1. Slow heating. The pool takes far longer to warm up than it used to, or never reaches the setting you chose.
2. No start. You turn the heater on and nothing happens, or it shows an error code.
3. Short cycling. The unit starts, runs briefly, and shuts off again.
4. Odd noises. Rattling, banging, or loud humming from the heater cabinet.
5. Visible wear. Corrosion, water around the unit, or a heater that looks tired after years of humid, salty air.
6. Rising energy use. The heater seems to run constantly with little to show for it.

If you see more than one of these, a diagnostic visit usually saves money compared with guessing at parts.

Heater types to consider

Pool heaters generally come in a few common forms. Which one suits your pool depends on how you use it, how the property is set up, and what utilities are available.

1. Heat pump. This type pulls warmth from the surrounding air and transfers it to the water. It is common in mild climates like South Florida and tends to be efficient, though it works slower on very cold nights.
2. Gas heater. This type burns fuel to heat water quickly, which suits people who want fast warm-up before a swim. It requires a suitable gas supply.
3. Solar heating. Panels use sunshine to warm the water. It works best when the layout gives panels plenty of sun, and it is usually slower on cloudy or cool days.

Ask us what makes sense for your pool and we will talk through the tradeoffs in plain terms before anything is installed.

Heater work versus other pool work

People often lump all pool equipment problems together. A cold pool is not always a bad heater. Low flow from a clogged filter, a pump problem, or a tripped breaker can also stop a heater from running. Part of a diagnostic visit is sorting out which piece is the real cause.

This page covers pool heating: installing heaters and servicing them. Pool cleaning, water chemistry, resurfacing, and pump or filter replacement are separate services, so if your problem sits there, ask us and we will tell you how we can help. Your home air conditioning is a different system entirely, and we can look at that as part of our HVAC work.

How visits work

A typical pool heating job starts with a conversation about what you are seeing and what you want, such as a warmer pool in winter, quicker heating, or a replacement for a heater that has died. Then we look at the pool, the equipment pad, and the existing heater if there is one.

From there you get an explanation of the options. For a repair, that means what failed and what fixing it involves. For an install, it means the heater type, the size, and what the setup requires. Once you approve the plan, the work is done and the heater is tested so you can see it running. We also show you how to use the controls.

What good work looks like

Whoever you hire, here are practical standards for judging the job:

• Right-sized equipment. The heater should be matched to your pool volume, not picked from whatever is on the truck.
• Clean connections. Plumbing, electrical, and any gas work should look tidy, secure, and protected from weather and moisture.
• A real test. The installer should run the heater, confirm it starts, and check for leaks before leaving.
• Clear instructions. You should know how to set the temperature, what normal operation sounds like, and what to do if something looks off.
• A clean work area. Old parts and packaging should leave with the crew.

What affects the cost

Pool heating jobs vary a lot, which is why a fair quote begins with a look at your setup. The main factors are:

• Heater type and size
• Pool volume and whether it has a spa or a screened enclosure
• Whether you are replacing a unit or adding one for the first time
• Electrical or gas connection needs and the distance to the equipment pad
• Condition of nearby plumbing and equipment
• Any permits or inspections the work requires
• Parts and labor needed for a repair

A clear written quote should spell out the scope of work, the equipment being installed, what is and is not included, any extras, and how changes are handled if something unexpected turns up once work begins. If a quote is vague on any of those, ask for it in writing before you agree.

Questions to ask first

Before you hire anyone for pool heating in Hobe Sound or elsewhere in Martin County, ask:

1. Do you hold the state license that applies to this work, and are permits needed for my installation?
2. Are you insured for work on my property?
3. What exactly is included in the quote, and what would count as an extra?
4. When can you start, and how will you let me know if the schedule shifts?
5. Who do I contact with questions once the job is done?
6. Can you explain why you recommend this heater type for my pool?

Common questions

How long does a pool heater installation take?

It depends on the heater type, whether you are replacing or adding a unit, and what the electrical or gas connections require. A straightforward swap is usually quicker than a first-time install. We confirm the expected scope when we review your setup.

How often should a pool heater be serviced?

Many homeowners have the heater checked once a year, ideally before the cooler months when it gets the most use. If you notice slow heating or strange noises, do not wait for the next scheduled check.

Can I swim comfortably in winter in Hobe Sound?

Winters here are typically mild, but cold fronts can drop water temperatures quickly. With a suitably sized heater, many owners extend their swimming season considerably. Very cold nights can still slow heating, especially with heat pumps.

How is the price worked out?

Pricing depends on the heater type and size, your pool volume, the condition of existing equipment, connection requirements, and any permits. For repairs, it depends on the parts and labor involved. We put the scope in writing so you can compare it clearly.

Can a heater be added to an existing pool?

Yes, in most cases. The key questions are where the equipment sits, what utilities are nearby, and which heater type fits. A site visit answers those quickly.

Will a heater raise my energy bill?

Usually, yes, because you are adding a load. How much depends on the heater type, how warm you keep the water, how long it runs, and whether you use a pool cover. We can explain what to expect for the heater you are considering.

Get your pool ready

If your pool is too cold, your heater is acting up, or you are comparing heater options, call or send a request through this page. Tell us what you are seeing and we will arrange a visit to your Hobe Sound property, explain your options clearly, and give you a written quote before any work starts.